12 MM SOLID WOOD BOARDS
1067.5 / 762.5 / 610 / 457.5 / 305 x 80
x 12 mm
3.5' / 2.5' / 2' / 1.5' / 1' X 3.15" x
0.5" |
| Property |
Property Requirements |
| Wood Species |
Rubberwood (Hevea Brasiliensis ) |
| Appearance grading face |
Not permissible the following :-
Knife checks, spilts, thundershak, inbark, discolouration, biological attack, pressure marks, moisture marks, glue marks, false heartwood, clustered knots.
Open defects. Permissible :-
Small knots max. diam. 8mm. Max.nr. 2 per board. |
| The matching for jointing, pattern, structure, colour and finishing |
In accordance with the approved technical samples |
| Moisture content (major) |
8% +/- 2% |
| Final sanding operation (major) |
Polish sanding - surface shall be clean and smoothly sanded. Not permissible : tape marks, sanding hit or miss |
| Trimming / cutting edges longitudinal and transverse (critical) |
Provide with tongue & groove on all 4 sides. In accordance with the sample. Edges should be parallel in length & width, rectangular and sharp edged at the upperside and straightly machined. Process defects - Edges on all 4 sides not permissible such as: chipping, scoring marks, broken corners, defective trimming. |
| Assembling Tongue & Groove (major) |
Height difference max. tol. ± 0.1 mm. T&G fitting matching to all production. |
| Dimension, dimensional tolerance & stability |
Length: tol 1067.5 mm to 305 mm, +/- 0.01mm
Width: tol. 80mm, +/- 0.1mm
Thickness: 12 mm, +/- 0.2mm
Edges squareness: tol. 0.01mm
Cupping transverse: tol. 0.20mm (convex / concave)
Cupping longitudinal: 4.0mm convex & 2.0mm concave |
| Type of bond & performance (critical) |
E1 norm : < 0.1 ppm (WKI tests)
PVA
Bonding performance shall meet the wood failure
Requirement in accordance with IHPA - 1997
Not permissible : blisters, delamination |
| Finishing |
UV Sealer 2 times & UV finishing coats - 2
Total SV: min.45gr / M2 based on polyurethane acrylate
Products of Bonakemi, Sweden and Klumpp, Germany |
| Packaging & marking |
Packaging shall be seaworthy & will be strong enough to withstand transit conditions. |
19 MM SOLID WOOD BOARDS
900 / 600 / 450 / 300 x 80 x 19 mm
2.95' / 1.97' / 1.48' / 0.98' x 3.15" x 0.75" |
| Property |
Property Requirements |
| Wood Species |
Rubberwood (Hevea Brasiliensis ) |
| Appearance grading face |
Not permissible the following :-
Knife checks, spilts, thundershak, inbark, discolouration, biological attack, pressure marks, moisture marks, glue marks, false heartwood, clustered knots.
Open defects. Permissible :-
Small knots max. diam. 8mm. Max.nr. 2 per board. |
| The matching for jointing, pattern, structure, colour and finishing |
In accordance with the approved technical samples |
| Moisture content (major) |
8% +/- 2% |
| Final sanding operation (major) |
Polish sanding - surface shall be clean and smoothly sanded. Not permissible : tape marks, sanding hit or miss |
| Trimming / cutting edges longitudinal and transverse (critical) |
Provide with tongue & groove on all 4 sides. In accordance with the sample. Edges should be parallel in length & width, rectangular and sharp edged at the upperside and straightly machined. Process defects - Edges on all 4 sides not permissible such as: chipping, scoring marks, broken corners, defective trimming. |
| Assembling Tongue & Groove (major) |
Height difference max. tol. ± 0.1 mm. T&G fitting matching to all production. |
| Dimension, dimensional tolerance & stability |
Length: tol 900mm to 300 mm, +/- 0.01mm
Width: tol. 80mm, +/- 0.1mm
Thickness: 19 mm, +/- 0.2mm
Edges squareness: tol. 0.01mm
Cupping transverse: tol. 0.20mm (convex / concave)
Cupping longitudinal: 4.0mm convex & 2.0mm concave |
| Type of bond & performance (critical) |
E1 norm : < 0.1 ppm (WKI tests)
PVA
Bonding performance shall meet the wood failure
Requirement in accordance with IHPA - 1997
Not permissible : blisters, delamination |
| Finishing |
UV Sealer 2 times & UV finishing coats - 2
Total SV: min.45gr / M2 based on polyurethane acrylate
Products of Bonakemi, Sweden and Klumpp, Germany |
| Packaging & marking |
Packaging shall be seaworthy & will be strong enough to withstand transit conditions. |
14mm 3 LAYER BOARDS
1200 x 155 x 14 mm (4 mm wear layer)
3.93' x 6.10" x 0.55" (0.16" wear layer) |
| Property |
Property Standards |
| Wood Species face veneer |
Rubberwood (Hevea Brasiliensis ) |
| Wood Species for core and back |
Hevea, hardwood . |
| Appearance grading face veneer |
Free of splits, thundershake, inbark, discolouration, biological attack, pressure marks, moisture marks, glue marks, false heartwood, clustered knots. Coloured sapstain, telegraphing of back core or underlying characteristics of the core and other open defects. Permissible : Small knots max. diam. 8mm. Max.nr. 2 per board. |
| The matching for jointing, pattern, structure, colour and finishing |
In accordance with the approved samples |
| Moisture content |
8% +/- 2% |
| Final sanding operation |
Polish sanding - surface shall be clean and smooth sanded. Free of tape marks, sanding marks. |
| Thickness of face veneer |
Min. thickness face veneer after final sanding operation
for 2.0 mm at least 1.75 mm
for 4.0mm at least 3.75mm |
| Trimming / cutting edges longitudinal and transverse |
Provide with tongue & groove on all 4 sides. In accordance with the sample, edges parallel in length & width, rectangular and sharp edged at the upperside and well machined. Free of process defects. Edges on all 4 sides free of chipping, scoring marks, broken corners, defective trimming. |
| Assembling Tongue & Groove |
Opening max. tol. 0.01mm. Height difference max. tol. ± 0.1 mm. T&G fitting matching to all production. |
| Dimension, dimensional tolerance & stability |
Length: tol 1200mm, +/- 0.01mm
Width: tol.155mm, +/- 0.1mm
Thickness: 14mm, +/- 0.2mm
Edges squareness: tol. 0.01mm
Cupping transverse: tol. 0.20 mm (convex / concave)
Cupping longitudinal: 4.0mm convex & 2.0mm concave |
| Type of bond & performance |
E1 norm : < 0.1 ppm (WKI tests)
PVA
Bonding performance shall meet the wood failure
Free of blisters, delamination. |
| Finishing |
UV Sealer 2 coats & UV finishing 2 coats
Total SV: min.45gr/m2 based on polyurethane acrylate
Gloss: 35% +/- 2% or 100% +/- 2%
Products of Bonakemi , Sweden and Klumpp , Germany |
| Packaging & marking |
Packaging shall be seaworthy & strong enough to withstand transit conditions. |
|
|
